I’m tired build... (Back With One of Those Funny Looking Jeep Truck Deals)

[HolyHandGrenade]

I suppose this is more of a “built thread”. After the 37s, rear Dana 60, the flatbed build, and a bunch of other stuff over the Winter, I’m officially tired of working on this truck.

I bought it new in 2013 and haven’t really stopped since. Now, I just want to wheel it. Other than maintenance and carnage repair, I’m done for a while.

Well, except for the steering. Still need to beef up the steering. Somehow...

SUSPENSION/LIFT
-ADS Extended Travel Coilovers
-SPC UCAs
-Dakar Leaf Pack with D29XL Add a Leaf
-Bilstein B110's Rear
-U-Bolt Flip
-Superbumps Front And Rear
-Archive Shackle Flip
-37x12.5x17 Cooper Discovery Pros
-Jegs Steelies With TMI Weld On Beadlocks

PERFORMANCE & DRIVETRAIN
-Magnuson Supercharger
-2.55 Pulley
-61 lb injectors
-URD 7th Injector
-UCON
- Roostfactor Pulley Wrap Kit
-URD Fuel Pump Kit
-Doug Thorly Pipe Bomb
-Doug Thorly Long Tube Headers
-URD Cat-back
-Drop in AFE Filter (Pro Dry)
-IPT Valve Body
-Twin Sticked FJ T-Case
-FJ Tube (ADD Delete)
-ECGS Built 4.88 Front Diff With ARB
-ECGS Rear Dana 60 with OX Locker
-One Piece Driveshaft
-RCV Front Axles


ARMOR Gusseting
-Bruteforce Front Bumper / ComeUp 9500 LB Winch
-Home Made Flatbed
- Mobtown Offroad IFS, Trans, & T-case Skids
-RCI LCA Skids
-Pelfreybilt Fuel Tank Skid
-Bruteforce Sliders
-Gussetted Cam Tabs
-Coil Tower Gussets
-Spindle Gussets
-Mohawk Fab Traction Bar
-Mohawk Fab Rear X-Member


-Blue Sea Fuse Block
-Iggy Panel
-In Cab Winch Switch

Misc
-OBA ARB Twin Compessor With 2.5 Gal Tank
-Cowl Intake
-ScanGauge ll
-Trans Cooler With Fan
-Interior Wall Plug Run Off Factory Invertor
-Fog Light Anytime Mod (Switch now controls light pods in front bumper)
-400W Anytime Mod

 

[WrenchnWheel]

Looks bad ass based on the specs, lets see some pics though!

 

[HolyHandGrenade]

Looks bad ass based on the specs, lets see some pics though!

Ha! I’m working on it. Pics are not uploading well.

 

[Stairgod]

Not this shit again

 

[Blender]

Ha! I’m working on it. Pics are not uploading well.

It’s been 9 minutes. Unfuck your pictures

 

[Rapier46]

Where’s the plastidip mod

 

[TACOVRD]

https://www.solomotorsports.com/sho...ta-parts/toyota-tacoma-steering-rack-upgrade/

 

[HolyHandGrenade]

Not this shit again

Deja Two

 

[HolyHandGrenade]

It’s been 9 minutes. Unfuck your pictures

Ha! Should be un-fucked now.

https://www.solomotorsports.com/sho...ta-parts/toyota-tacoma-steering-rack-upgrade/

I ALMOST ordered that and their TREs. I’m still hoping, although I know the chances are slim, that Marlin will make a standard width Marack.

 

[HolyHandGrenade]

Where’s the plastidip mod

Probably on some third Gen somewhere

 

[HolyHandGrenade]

 

[Rapier46]

Probably on some third Gen somewhere

Ok maybe we can be friends.

Have you fabricated anything on this truck other than the flat deck or it is bolt on stuff

If you are a cool fabricator dude we can definitely get along


Otherwise I hate

 

[AssBurns]

Wow, @Tetten this guy might have you beat on who’s truck is cooler.

Ha! Should be un-fucked now.


I ALMOST ordered that and their TREs. I’m still hoping, although I know the chances are slim, that Marlin will make a standard width Marack.

Will Marlin ever be able to actually ship any products or will they just take a deposit and add you to a wait list. Asking for a friend, who also happens to be @Tetten

Might as well just get the Solo rack instead of wait forever for anything from Marlin.

 

[Stale-taco]

When are we wheeling???

 

[HolyHandGrenade]

Ok maybe we can be friends.

Have you fabricated anything on this truck other than the flat deck or it is bolt on stuff

If you are a cool fabricator dude we can definitely get along


Otherwise I hate

I only started welding a couple of years ago. Prior to that @Stairgod was my go to cool fabricator dude.

He built me a kick ass traction bar that has saved my driveshaft countless times. A really heavy duty rear crossmember, etc. guy can Tig too.

Recently, I bit off more than I could chew with the tubbing and Jon saved my ass there too. I’d like to think that I could handle forming the Sheet metal myself now that I’ve seen it done but time will tell.

I did the flatbed, rear frame boxing, bead locks, off road trailer, new crossmember for the traction bar to attach to, twin sticks, and few other small things.

Suppose I’m a cool fabrication dude in training?

The offroad trailer was my first real project
https://www.tacomaworld.com/threads/60’s-sears-allstate-“luggage”-off-road-trailer.526081/

When are we wheeling???

Soon man. Can’t wait to get back on the trail. It’s been way too long.

 

[Stairgod]

Ok maybe we can be friends.

Have you fabricated anything on this truck other than the flat deck or it is bolt on stuff

If you are a cool fabricator dude we can definitely get along


Otherwise I hate

He is a decent fabricator. Don't listen to him. His welding is damn good for a noob, and he has some very good ideas.

 

[HolyHandGrenade]

He is a decent fabricator. Don't listen to him. His welding is damn good for a noob, and he has some very good ideas.

Thank you Jon. Where’s the blushing emoji?

 

[Stairgod]

That one?