AssBurns BeerRunner Build Thread

AssBurns

will wheel for beer
Staff member
Joined
Oct 1, 2018
Messages
6,183
Age
28
Location
Yucaipa, CA
Whatchu doing with that 3.4 :spy:
Right now the plan is to leave it with Caleb and let him get rid of it. Not really looking to haul it back down from Sacramento. It's got head gasket issues anyways. (I think a cracked head)
Gonna have to redo your engine cage when you get it back?
Likely. I left room for engine space, but might have to make some modifications for radiator and AC condenser. Not too big of a deal since the cage work itself wasn't too much work, it was the bumper and figuring shit out that took most of my time. Also plan on doing a full cage when I get it back so what's a few extra tubes?
 
Joined
Mar 3, 2019
Messages
410
Age
35
Fak
Be alot cooler if it was down here and I could swoop the motor, wire harness and ecu to swap in the 91. I'd have to change the name of the truck though...
 

AssBurns

will wheel for beer
Staff member
Joined
Oct 1, 2018
Messages
6,183
Age
28
Location
Yucaipa, CA
Fak
Be alot cooler if it was down here and I could swoop the motor, wire harness and ecu to swap in the 91. I'd have to change the name of the truck though...
I'll talk to Caleb about it, but honestly it'll probably not be worthwhile to haul it back down from Sac.
your radiator looks like chewed bubble gum. how were you not overheating or running hot? damn.
Well, that's my condenser, so... not really going to cause overheating.
But yeah it's seen it's fair share of rocks and bugs over the last 20 years.
Read his previous:
See above smarty pants.

Only had overheating issues when the coolant got low luckily. I even had a much smaller and thinner radiator than stock too.
 
Top Bottom